User Manual

MIC2X

Microphone Input

Module

Features

• Electronically-balanced

• XLR connector

• Phantom power

• Gain/Trim control

• Hi- and Lo-cut filters

• Adjustable voice enhancer

• Audio gating with threshold adjustment

• Variable signal limiter

• 4 levels of available priority

• Can be muted from higher priority modules

• Can mute lower priority modules

Printed in Taiwan. 0208

54-2079-01R3

Specifications subject to change without notice.

50 Spring Street, Ramsey, NJ 07446, U.S.A.

201-934-8500; Fax: 201-934-9832

www.bogen.com

Block Diagram

PAGE 1
Block Diagram MIC2X Microphone Input Module Features 50 Spring Street, Ramsey, NJ 07446, U.S.A. 201-934-8500; Fax: 201-934-9832 www.bogen.com • Electronically-balanced • XLR connector • Phantom power • Gain/Trim control • Hi- and Lo-cut filters • Adjustable voice enhancer • Audio gating with threshold adjustment • Variable signal limiter • 4 levels of available priority • Can be muted from higher priority modules • Can mute lower priority modules Printed in Taiwan.
PAGE 2
Module Installation Jumper Selections 1. Turn off all power to the unit. Priority Level* 2. Make all necessary jumper selections. 3. Position module in front of desired module bay opening, making sure that the module is rightside up. 4. Slide module on to card guide rails. Make sure that both the top and bottom guides are engaged. This module can respond to 4 different levels of priority. Priority 1 is the highest priority. It mutes modules with lower priorities and is never muted.
PAGE 3
Block Diagram MIC2X Microphone Input Module Features 50 Spring Street, Ramsey, NJ 07446, U.S.A. 201-934-8500; Fax: 201-934-9832 www.bogen.com • Electronically-balanced • XLR connector • Phantom power • Gain/Trim control • Hi- and Lo-cut filters • Adjustable voice enhancer • Audio gating with threshold adjustment • Variable signal limiter • 4 levels of available priority • Can be muted from higher priority modules • Can mute lower priority modules Printed in Taiwan.