User Manual

ManualsBrandsBogen ManualsAudio EquipmentCoax Mini Pendant Speaker - White

Specifications subject to change without notice.

54-2194-01C 1307

MPS1, MPS2

Mini Pendant Speakers

Models MPS1B /MPS2B (Black),

MPS1W/MPS2W

(White)

Installation and Use Manual

MPS1_MPS2 Manual_Layout 1 7/25/13 1:52 PM Page 1

Summary of content (4 pages)

PAGE 1
MPS1_MPS2 Manual_Layout 1 7/25/13 1:52 PM Page 1 MPS1, MPS2 Mini Pendant Speakers Models MPS1B /MPS2B (Black), MPS1W / MPS2W (White) Installation and Use Manual © 2010 Bogen Communications, Inc. All rights reserved. Specifications subject to change without notice.
PAGE 2
MPS1_MPS2 Manual_Layout 1 7/25/13 1:52 PM Page 2 Power Tap Selection POWER TAP SELECTOR SWITCH 16-ohm or 70V The Power Tap selector switch is used to set the appropriate power level or impedance for your system. Rotate the switch until the power level you require lines up with arrow. IMPORTANT: When connecting to a 70V amplifier, make sure that the Tap Selector switch on the speaker IS NOT set in the “16Ω” position.
PAGE 3
MPS1_MPS2 Manual_Layout 1 7/25/13 1:52 PM Page 3 MPS1/2 Speaker Cable Connections and Suspension Instructions In addition to the Main suspension Drop Cable, a backup Safety Cable is required for proper installation. Use wire rope or other drop line rated for at least 100 lbs. to ensure a proper safety margin. The attachment point on the structure from which the speaker is to be anchored also must be able to handle 100 lbs.
PAGE 4
MPS1_MPS2 Manual_Layout 1 7/25/13 1:52 PM Page 4 Technical Specifications Frequency Response (-10dB)* MPS1: 50Hz to 14kHz; MPS2: 50Hz to 22kHz Driver Complement MPS1: 4-1/2” Dual-Cone Wide-Range; MPS2: 4-1/2” Woofer, 3/4" Coaxial Tweeter Sensitivity (1W/1m) MPS1: 86dB (Average 100Hz to 10kHz); MPS2: 87dB (Average 100Hz to 15kHz) Dispersion 140 degrees Impedance Range Low (16 Ohms) / High (70V) Power Input (Maximum) 50W @ 16 Ohms; 32W @ 70V Power Settings (in watts)** 70V; 32, 16, 8, 4, 2, 1 E