Quick Start Guide

www.nearspeakers.com
740-00051-00A
NEARSCAPES IG44.1DSP - QUICK START WIRING CONNECT GUIDE
TM
©2018 Bogen Communications, Inc.
Specifications are subject to change.
NEAR 3XL DSP POWER AMPLIFIER
350W/Channel
U NS IG44.1
IGS100M
SUBWOOFER
(16-ohm)
CHANNEL
B
CHANNEL
A
20 ft. cable with Perfect Fit
connectors is supplied with
each IG4M Speaker.
(4-ohm)
SELECT PRE-SET
ON NEAR 3XL TO:
IE1
(16-ohm) (16-ohm) (16-ohm)
IG4M LOUDSPEAKERS
Add 16g or greater wire from
the 3XL Amplifier to the IE1.
Each IG4M Loudspeaker is set to 16-ohm
(factory setting). This result is a 4-ohm load at
the 3XL Amplifier. The IGS100M Subwoofer
is wired as a 4-ohm speaker (there are two
voice coils in parallel).
Cut Plug
off cable
Speaker
cable
Splice
speaker
wire as
needed
Insert Plugs into Connector
Sockets and twist Plug
Ring to secure.
Perfect Fit
Connector Sockets
FROM
AMPLIFIER
FROM
SUBWOOFER
BLK
ORG
RED
GRN
JUMPER JUMPER
UNDERSIDE VIEW
OF IG4M
IE1 JUNCTION BOX
G4M
I
16
ohm
16W
32W
64W
G4M
I
16
ohm
16W
32W
64W
REAR VIEW
OF IG4M
(Protective
Cover removed)