http://support.yealink.com/ Enterprise IP Phone NQ-T2000 Quick Start Guide Applies to firmware version 124.86.78.1 or later.
Package Contents The following items are included in your package. If you find anything missing, contact your system administrator. IP Phone Handset Handset Cord Ethernet Cable Quick Start Guide Power Adapter Stand (NQ-T200: Optional) We recommend that you use the accessories provided or approved by Yealink. The unapproved third-party accessories may result in reduced performance. Assembling the Phone 1. Attach the stand: q q You can also mount the phone to a wall.
2. Connect the handset and optional headset: 3. Connect the network and power: You have two options for network and power connections. Your system administrator will advise you which one to use. PC Connection (Optional) PC Power Adapter (DC 5V) A AC Power Option B PoE ( Power over Ethernet ) Option PC Connection (Optional) PC IEEE 802.3af compliant PoE Hub/Switch The IP phone should be used with Yealink original power adapter (5V/600mA) only.
Configuring Your Phone Configuring via web user interface Accessing the web user interface: 1. Press (the OK key) when the phone is idle to obtain the IP address of the phone. 2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" or "192.168.0.10") and then press the Enter. 3. Enter the user name (default: admin) and password (default: admin) in the login page and click Login.
Placing a Call Call Hold Using the handset: To place a call on hold: 1. Pick up the handset. 2. Enter the number and press the Send soft key. To resume the call, do one of the following: Using the speakerphone: 1. With the handset on-hook, press . 2. Enter the number and press the Send soft key. Using the headset: 1. With the headset connected, press to activate the headset mode. 2. Enter the number and press the Send soft key. Press the Hold soft key during an active call.
Call Conference If you press the Option soft key, you can also do the following: 1. Press the Conf soft key during an active call. The call is placed on hold. 2. Enter the number of the second party, and press the Send soft key. 3. Press the Conf soft key again when the second party answers. All parties are now joined in the conference. 4. Press the EndCall soft key to disconnect all parties. • Select Detail to view detailed information about the entry.
