Specifications

[44]
FEATURE FEATURE CODE ADDITIONAL DATA DEFAULT
Time Trigger 6
Zone Group *86 Zone Numbers No Zones
Inhibit 160 Inhibit
Enable 161 HHMM See Note 3 (below)
2-Second Tone 162
3-Second Tone 163 3-Second Tone
4-Second Tone 164
5-Second Tone 165
6-Second Tone 166
7-Second Tone 167
8-Second Tone 168
Chime 169
Time Trigger 7
Zone Group *87 Zone Numbers No Zones
Inhibit 170 Inhibit
Enable 171 HHMM See Note 3 (below)
2-Second Tone 172
3-Second Tone 173 3-Second Tone
4-Second Tone 174
5-Second Tone 175
6-Second Tone 176
7-Second Tone 177
8-Second Tone 178
Chime 179
Time Trigger 8
Zone Group *88 Zone Numbers No Zones
Inhibit 180 Inhibit
Enable 181 HHMM See Note 3 (below)
2-Second Tone 182
3-Second Tone 183 3-Second Tone
4-Second Tone 184
5-Second Tone 185
6-Second Tone 186
7-Second Tone 187
8-Second Tone 188
Chime 189
Reset Default 999
Setup Tone (in Program Mode Only)
Turn On 000
Turn Off Hang Up
Notes to Feature Codes:
Note 1. These 2 digits represent time in 10s of seconds, i.e., "01" = 10 seconds, "03" = 30 seconds, "09" = 90
seconds, etc. Entering "00" will inhibit timer operation.
Note 2. This single digit indicates VOX delay time in seconds. Entering "0" will inhibit VOX timer operation.
Note 3. Entering the Feature Code without additional time data will enable feature using previously programmed
time data.