Specifications

1.
Introduction
The PCM Paging Control System (see Figure 1-1) is an expandable zone paging and signaling system. The
LUPCMALL consists of 4 pre-assembled modules: PCMTIM, PCMCPU, PCMTBM, and a Zone Paging Module
(PCMZPM). To this, you can add up to two additional Zone Paging Modules (Model: LUPCMZONE, Pec Code
5323-108, Com Code 408186039) to increase system zone paging capacity to 9 zones.
If more than 9 zones are required, expansion assemblies (Model: LUPCMADD, Pec Code 5323-107, Com Code
408186021) can be added up to a total capacity of 99 zones in 3 zone increments. Expansion assemblies include a
PCMCPU and a PCMZPM.
The Paging Control System provides the following features and functions:
1.1. Voice Channel
● Zone Paging & sub zone group paging (up to 32 zone groups, each with up to 99 zones)
● Over Ride paging (using loop start or contact closure)
● Talk Back paging (centrally-amplified zones only)
● Talk/Talk Back selection per zone
● High/Low-powered central paging
● High/Low power distributed paging
● Privacy Beep on talk back zones
● Pre-Announce Tone
Figure 1-1: PCMALL Paging System Control Assembly
[5]