Specifications

[7]
2. Before You Start
2.1. Select Options
Before setting up your system, use the checklist below to assist you in setting up and programming the PCM
Paging Control System.
____ Type of Telephone Interface (loop start, ground start, page port, station port) (see System Wiring
Connections, Section 5)
____ Total Number of Paging Zones (additional Zone Paging Modules or LUPCMADD Paging Control
System Assemblies may be required) (see Installation, Section 3)
____ Zone Groups (see Section 11.1)
____ Time-Triggered Signaling (see Sections 11.2 and 11.8):
____ Signaling Zone Groups (see Section 11.8)
____ Clock Synchronization (see Section 11.7.1)
____ All-Call Capability (see Section 11.1)
____ Code Calling Capability (see Section 11.2)
____ Background Music (see Section 7):
____ Continuous in Zones Not Being Paged (see Section 7.2)
____ Cease in All Zones During Page (see Sections 7.3 and 7.4)
____ Inhibited in Some Zones (see Section 7.6)
____ Different in Some Zones (see Section 7.5)
____ Night Ring Capability (see Section 5.6)
____ Over Ride Capability (see Section 5.7):
____ From Telephone/Loop Start Trunk (see Section 5.2)
____ From External Audio Equipment (see Appendix A)
2.2. Package Contents
• 4 pre-assembled modules - PCMTIM, PCMCPU, PCMTBM, and PCMZPM
• Power Supply
• Rack Mount brackets (2)
• Installation and Use Manual
• Screws