Datasheet

www.bogen.com
12
SPEAKERS
Special Protection
The SPT15A, SPT30A, BDT30A and
KFLDS30T use a cast aluminum end
bell specially designed to make them
weatherproof. A rotary selector
switch
is used to set the specific
power tap for
the speaker. This switch’s entry into the
end bell is sealed by a special mount-
ing nut with an integral O-ring. A re-
movable plastic panel protects both
the rotary switch and the electrical
connections. This panel provides a
narrow openingfor the speaker wires
to exit, reducing the chance of water
infiltration.
Tilt & Swivel Base
Bogen’s 15- and 30-watt horns include
a unique and easy-to-use tilt and
swivel mounting base that provides
nearly 180 degrees of tilt and a full 360
degrees of swivel. A single wing nut
locks in the angle of the speaker. Loos-
ening the wing nut frees the speaker
in each rotational axis, making it fast
and easy to precisely aim the speakers
where the sound is needed. The base
provides three holes for screw mount-
ing and a slot to allow strapping the
speakers to beams. The
actual mount-
ing base can easily
be removed so that
the base can be installed separately.
The speakers can then be attached to
the bases at a later time.
Accessories
BC1
Beam Clamp
TCSPT1
Terminal Cover
for Conduit
(For BDT30A, KFLDS30T,
SP158A, SP308A, SPT15A,
& SPT30A)
HSES10
Horn Speaker
Electrical Box Strap
(pack of 10)
(Not for SP58A & SPT5A)
Product Features:
• Maximum speaker power capacities of 7.5, 15, and 30 watts
• Rotary switch-selected power taps on transformer models
• Constant voltage (70V/25V) and 8-ohm versions
(KFLDS30T and BDT30A are 70V/25V only)
• Tilt & swivel base for easy positioning
• Sturdy, all-metal construction with mocha enamel finish
(KFLDS30T horn flare is constructed of polycarbonate)
• Weatherproof design
• Twin reentrant horns for bi-directional projection (BDT30A only)
• KFLDS30T provides wide-angle projection with a rotatable
horn flare
SPT15A, SP158A,
SPT30A
+
, SP308A
+
Bogen’s Horn Loudspeakers offer high efficiency
and excellent intelligibility. Rotary switch-selected
power taps make installation quick and easy.
SPT and BDT models are compatible with 70V and
25V paging systems, SP models are 8-ohm
versions. The KFLDS30T is a 70V/25V wide disper-
sion, high-intelligibility, reentrant type loudspeaker.
The IH8A is a paging horn.
BDT30A
*
IH8A
KFLDS30T
SPT5A,
SP58A
+
For style only, product is larger
* Some assembly required
HORN LOUDSPEAKERS