Datasheet

Product Features:
• Superior sound in a very compact enclosure
• Wide-dispersion coaxial driver for broad,
even coverage; superb off-axis response
• Small footprint, visually appealing
• Only 6-1/4" diameter ceiling opening required
• Installs in wide range of ceiling types
• For 70V and low-impedance systems
• Selectable power taps via control mounted under
grille; 16, 8, 4, 2, 1 watts at 70V
• 16-ohm selector position for low-impedance systems
• Quick wiring with removable plug-in connector
providing loop-through terminals
• Attachment point for seismic safety cable
• Input terminal cover with conduit knockout
• Fire-rated (94VO) ABS baffle
• Compound rubber surround for
lasting performance year after year
• Integral mounting clamps tighten
quickly and firmly
• Tile bridge (TBSF) accessory recommended
for suspended ceiling installations
• Off-white, paintable finish
• Listed to UL Standard 60065
for US and Canada
Product Features:
• Flat bass response down to 40 Hz
• Computer-matched venting system for full bass output
• 11" deep enclosure clearance
• Integral swing-out mounting clamps eliminate need
for tile bridge
• High power handling capability for foreground sound
• Selectable power taps via front-mounted control
• Power taps: 64, 32, 16, 8, 4, and 2 watts @ 70V
• 8-ohm selector position for low-impedance systems
• Compound rubber surround for lasting performance
• Easy wiring with plug-in connector providing
loop-through terminals
• Fire-rated (94VO) ABS baffle
• Attachment point for seismic safety cable
• Input terminal cover with conduit knockout
• Attractive, contemporary, sturdy steel
grille assembly with fine perforations
• Off-white, paintable finish
• Listed to UL Standard 60065
for US and Canada
www.bogen.com
7
SPEAKERS
CEILING SPEAKERS
High-Fidelity Ceiling Subwoofer
CSUB
The Bogen CSUB Ceiling Subwoofer delivers outstanding bass response in
both suspended ceiling and sheetrock installations. The CSUB can provide
deep, rich bass response to any speaker system. Perfect accompaniments
to the CSUB are Bogen’s HFSF1 and HFCS1/LP ceiling speakers, as well as
NEAR’s OCS1 ceiling loudspeaker.
The CSUB offers six levels of power output settings plus an 8-ohm position
controlled via a front-mounted, rotary tap selector switch (under grille). The low-
distortion speaker design, coupled with a computer-matched venting system,
delivers exceptional low-frequency response for music. The mechanical CSUB
design features four swing-out mounting clamps that eliminate the need for
a separate tile bridge when used in suspended ceiling applications.
High-Fidelity Ceiling Speaker
HFSF1
The Bogen HFSF1 High-Fidelity, Small-Footprint Ceiling Loudspeaker delivers
superior sound in a very compact enclosure. The speaker is unobtrusive at only
7-1/4" in diameter, and mounts easily in all types of ceilings including existing
hard-surface types and suspended ceilings.
The low-distortion, coaxial-design speaker, coupled with a computer-matched venting
system, delivers superb fidelity for music as well as high intelligibility for voice reinforce-
ment. Coupled with the Bogen CSUB Ceiling Subwoofer, it provides the perfect solution for
environments that require the highest-quality sound with minimal visual impact.
Accessories
CK10
10 ft.
Cable Kit
(Silver)
Technical Specifications:
Impedance Power Handling Sensitivity
Frequency
Dimensions
Product
Response Weight
8 Ω Nominal
70V Settings
150W (8 Ω)
64, 32, 16, 8, 4,
2W taps (70V)
40 Hz -125 Hz
91 dBspl
@ 1W/1m
15-1/2" dia.
x
12-1/2" D
20 lb.
Technical Specifications:
Impedance Power Handling Sensitivity
Frequency
Dimensions
Product
Response Weight
16 Ω Nominal
70V Settings
50W (16Ω)
16, 8, 4,
2, 1W taps(70V)
78 Hz - 20 kHz
86 dBspl
@ 1W/1m
7-1/4" dia.
x
7-1/2" D
4.5 lb.
Accessories
TBSF
Tile Bridge
Support Ring
CK10
10 ft. Cable Kit
(Silver)