Spec Sheet

Wall Baffle, Grilles, Accessories
• Sturdily constructed
• Attractively styled and finished
• Wall baffle surface mounts at an angle for downward sound dispersion
WB8 Wall Baffle
The WB8 baffle is ruggedly constructed of 3/8" particle board,glued and covered in
simulated walnut vinyl with a black grille cloth. Side corner joints are reinforced with
glue blocks. It is handsomely styled and looks well in virtually any decor. The slop-
ing front provides extra downward sound dispersion.
Ceiling Grilles
Sturdily constructed and handsomely styled, these metal grilles protect and conceal
recessed 8" ceiling speakers. They are shipped complete with the hardware needed
to mount speaker to grille. Models CG8A, CG8AW, PG8A, PG8W, and SG8W.
RE84 Ceiling Speaker Enclosure
The RE84 is a protective enclosure for an 8" speaker, designed for recessed instal-
lations, and for use with any of the Bogen ceiling grilles. One-piece steel construc-
tion includes a mounting ring and a foam insert to reduce metallic resonance. The
RE84 is finished in rust-resistant black primer and is tapered for easy stacking.
UL approved.
MR8 Mounting Ring
The MR8 is a cold-rolled steel unit which will mount any of the Bogen ceiling grilles,
for installations where the RE84 is not used.
TB8 Tile Bridge
The TB8 is a load bearing T-bar support designed to sustain the weight of an 8"
speaker,grille and protective enclosure in suspended ceiling construction. Use of the
TB8 improves environmental safety and eliminates unsightly sag in 2'-by-2' and 20'-
by-4' acoustic ceiling tiles.
Speaker Line Attenuators
The AT10A and AT35A are 10-watt and 35-watt attenuators that permit setting
the output level at loudspeakers on a 25V or 70V line without altering the amplifier
volume setting. They provide a choice of 10 stops and an "off" position.
2
Technical Specifications
Wall Baffle Ceiling Grilles
WB8 CG8A CG8AW PG8W PG8A SG8W*
Speaker Accommodated 8" cone 8" cone 8" cone 8" cone 8" cone 8" cone
Constructed of 3/8" Particle Aluminum Aluminum Steel Aluminum Steel
Board (contoured) (contoured)
Finish Walnut Vinyl** Satin Semi-gloss Semi-Gloss Satin Semi-Gloss
Aluminum White Enamel White Enamel Aluminum White Enamel
Diameter/Dimensions See Below† 12-
5
/
8
" 12-
5
/
8
" 13" 13" 13"
Shipping Weight 4 @ 10 lbs. 15 @ 8 lbs. 15 @ 9 lbs. 20 @ 27 lbs. 20 @ 10 lbs. 10 @ 13 lbs.
* Features hidden speaker mounting studs • **With black grille cloth • † 9-1/2"W x 9-1/2"H x 5-1/4"D (3-1/4" D at bottom)
WB8
CG8A
(shown),
CG8AW
PG8A
(shown),
PG8W
SG8W
MR8
RE84
TB8
AT10A