User Guide

10
TPU600-G2
Specications
Technical Specications
Power Output .............. 600W RMS
Frequency Response ....... 20 Hz to 22 kHz ±1dB
Distortion ................. Less than 1%
Hum & Noise .............. (20 Hz to 20 kHz) Music: -54 dB; TEL: -54 dB; MIC:-50 dB
Sensitivity ................ Music: 250 mV; Tel: −14 dBm (170mV); MIC: −50 dBv (3.1mV); E.I.N. −119 dBv
Tone Control .............. Bass: ±9dB @ 100Hz; Treble: ±9 dB @ 10 kHz
Inputs (all via pluggable Phoenix-style connectors):
Tel .................... 600-ohm balanced line, transformer-isolated
Music ................. Hi-Z source
Mic ................... Lo-Z balanced (dynamic only)
Music Mute ............ Mutes music when shorted
Contact Ring ........... Sounds night ringer tone when customer-supplied dry contacts are closed
Tel Ring ............... Sounds night ringer in response to 90V ring signal
Bridging ............... Permits bridging of two ampliers to increase the total output power
Output
Speaker ............... 8-ohm, 25V, 70V
Balanced Line Level ..... 600-ohm Telephone line
Controls and Indicators ..... CLIP, PROTECT, POWER, and LIMIT LEVEL LED indicators. ENHANCE, TREBLE,
BASS, VOXSENS, RINGER VOLUME, MUSIC MUTE, MUSIC VOLUME, MIC VOLUME,
TEL VOLUME, ALC controls
Overload Protection ........ All models have thermal and electronic overload protection
Power Requirements ....... 100–240 VAC, 50/60 Hz, 6.0 A
Thermal Emissions
(Full Power) ............... 294 BTU/hr
Dimensions* .............. 8.00” W x 3.43” H x 13.48” D
Product Weight ............ 6.2 lbs
* Depth includes Phoenix connectors; width is without rackmount brackets attached; height excludes rubber mounting feet