User Guide
3
TPU600-G2
TPU600-G2 Amplier Front Panel
TPU600-G2 Amplier Rear Panel
Introduction
This document describes the Bogen TPU600-G2 Telephone Paging Amplier. It is a full-featured, wall- or
rack-mounted amplier that provides inputs for a dry-loop, 600-ohm telephone page signal, a background music
source, and a low-impedance microphone. Automatic background music mute is provided when making a tele-
phone page. The background music mute level during a page is adjustable, and the music slowly fades back in
after the page is completed. A Normally Open (NO) contact closure music mute control input is provided for use
with push-to-talk microphones. An Automatic Level Control (ALC) system limits the output level of the telephone
page channel so that differences in the volume of the paging party’s voice will be less noticeable. Bass and treble
controls are provided for adjusting the quality of the output signal. An Audio Enhancement (ENHANCE) feature is
also provided to improve the clarity of the output signal by regenerating the higher-frequency harmonics that are
normally lost through the telephone system. The TPU amplier includes a built-in night ringer that can be triggered
by either a standard (analog) telephone ring signal or an external contact closure. The night ringer mutes the back-
ground music, but does not affect pages.
Package Contents
• Telephone Paging Amplier unit
• Rack Mount Kit (NQ-RMK03)
• Wall Mounting Ears Kit
• Security Cover
• Installation and Use Guide
Before you start
Review the contents of the box. Read through this entire manual to understand how this product installs and oper-
ates.
This equipment IS NOT suitable for use in locations where children are likely to be present.
Equipment is intended for use only in a restricted access area.