User Guide

4
TPU600-G2
Figure 1: Single Unit Rack Mounting
Figure 2: Side-by-Side Mounting
Figure 3: Wall Mounting
Rack Mounting
The TPU600-G2 can be rack-mounted through the use of a single-unit Rack Mount Kit (P/N: NQ-RMK03), which
is included. Use the supplied screws to attach the brackets to each side of the amplier, as shown in Figure 1. If
mounting two ampliers side-by-side in a 19-inch rack, use the optional NQ-RMK04 joining bracket between the two
ampliers along with the supplied Rotatable Mounting Ears Kit (see Figure 2).
Wall Mounting
To wall-mount the ampliers, use the included Rotatable Mounting Ears Kit. Attach the mounting ears to each side
of the amplier as shown in Figure 3. Ensure the rubber feet are not attached to the amplier. Attach the assembled
unit to the wall using the appropriate user-provided fasteners.
Ventilation
When rack-mounted, allow 1-RU spacing (1.75 inches) between units for proper ventilation.
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-
cloths, curtains, etc.
Security Cover
The security cover prevents settings from being accidentally changed. To secure this cover to the amplier, line up
the cover slats to the slat holes on the amplier and push the cover into place (see Figure 4). To remove the security
cover to make adjustments to the settings, squeeze the top and bottom cover slats simultaneously and gently pull
the cover away from the unit.