Data Sheet

• 100-,150-, and 250-watt models, each with a
large power reserve
• Capable of handling 70V, 25V, 8-ohm,
and 4-ohm speaker loads
• 8 module bays
• Wide selection of advanced plug-in modules
• 2 module bays capable of handling signal
processing plug-in output modules
• 4 levels of priority between modules
• 11-segment LED output level meter monitors
the output level of the power amplifier with
Peak and Average meter switch
• Adjustable output level limiter with limit indicator
• Tape output available on front of unit
• Optional front-mounted input combo jack with
1/4" stereo phone and female XLR capabilities
• Motorized master volume control can be
remotely operated
• Bass and treble controls with center detent
• Two-color LED for each channel indicates
input active/clipping
•
Switch permits user to select either transformer-
coupled outputs or a direct low-impedance output
• Bass and treble control bypass switch (located
in module bay 6)
• 125 Hz Lo-cut feature (switch located in module
bay 6)
• 5-position barrier strip, with clamping washers,
provides connections for speaker loads
• Master mute function overrides all audio from
the mixer section of the amplifier
• Screw terminal for master mute and remote
volume control functions
• Each of the 8 module bays has an associated
independent volume control
• Remote volume control panel (RVCP)
(sold separately)
• Requires flush-mount (Model BBF) or surface-
mount (Model BBS) back boxes (sold separately)
• Requires front cover door (WMAD sold
separately)
• Listed to UL Standard 60065 for US and Canada
Features
Description
Specifications subject to change without notice.
© 2002 Bogen Communications, Inc.
54-8015-01B 1204
Wall-Mount
Power Vector
Modular Amplifiers
Models WV100,WV150,
and WV250
Bogen's Wall-Mount Power Vector modular amplifiers offer a wide range of power from which to choose
from, with three models ranging from 100W to 250W. The amplifiers are designed to work with both
high- (70/25V) and low- (4/8-ohm) impedance speaker systems.
Each model includes eight module bays for plug-in input modules and allows for up to four levels of priority
between modules. Two module bays are capable of accepting signal processing plug-in output modules.
Each module is controlled by an independent volume control with an associated signal/clip LED for signal
status. An 11-segment LED output meter monitors output signal level.
Each model includes a motorized master volume control that can be controlled using a remote volume
control panel (RVCP, sold separately
).