COMPLIES WITH PART 68, FCC RULES FCC REGISTRATION NUMBER: CD23CH-10678-PX-N RINGER EQUIVALENCE: 0.
Notice Important Safety Information Every effort was made to ensure that the information in this manual was complete and accurate at the time of printing. However, information is subject to change. Always follow these basic safety precautions when installing and using the system: 1.Read and understand all instructions. FCC Statement (Part 15) - Radio Frequency Interference 2.Follow all warnings and instructions marked on the product.
Table of Contents Description ......................................................................................................................2 Installation ......................................................................................................................2 Wall-Mounting........................................................................................................................2 Technical Specifications ....................................................................
Description The Bogen ZPM3 Zone Paging Module provides up to 3 one- or two-way paging zones, including all-call capabilities, for selfamplified or central-amplified paging systems. A night ringer feature provides night ring signaling in all zones or in a group of up to 3 user-selected zones. A shift change tone or Emergency All-Call with alert tone can be programmed to sound in all zones or in a group containing up to 3 user-selected zones.
Connections Connections to the Telephone System Loop Start Trunk Paging Port Figure 1 illustrates the connection of the ZPM3 to a Loop Start Trunk port and optional night bell connections. See Figure 2 if the system requires a 48V talk battery. Figure 4 illustrates the connection of the ZPM3 to a Paging Port. It is important that the port provide an audio pair that does not suppress the DTMF information. Also, the port must provide a normally-open contact closure (or use VAR1).
ZPM3 ZPM3 PBX T R GROUND START TRUNK PBX GND PAGING PORT T R PAGE AUDIO 1 2 CONTACT CLOSURE (N.O.) NIGHT RING CONTACT SEE NOTE 1 PBX ANALOG NIGHT LINE C.O. LINE (INCOMING) 24V POWER SUPPLY 24V POWER SUPPLY + + NOTES: 1. EITHER USE NIGHT RING CONTACT FROM PBX OR ACTUAL NIGHT LINE RING SIGNAL TO ACTIVATE ZPM3 NIGHT RING FUNCTION. USING BOTH IS NOT RECOMMENDED. NOTE: 1. T & R ARE A DRY AUDIO PAIR (NO DC VOLTAGE) CAPABLE OF PRODUCING DTMF TONES.
Connections Connections to the Paging System Central-Amplified Talk/Talk Back Systems with Page Muted BGM Central-Amplified Talk/Talk Back Systems with Dedicated High-Power Zones The configuration illustrated in Figure 6 mutes BGM in all zones when a page is made. The installation requires a paging amplifier and, in a talk back system, a talk back amplifier. A background music source is connected directly to the ZPM3 and level adjustments are made using the BGM LEVEL control on the ZPM3.
BGM SOURCE ZPM3 OUTPUT BGM AMP MUSIC IN RING TIP GND COM 25V 70V PAGING AMP MUSIC IN Figure 7 – Wiring Diagram, Central-Amplified System with BGM to All Unpaged Zones TEL LINE TYP RING TIP GND COM 25V + GND COM 25V 70V 70V MUTE TALKBACK AMP (OPTIONAL) NOTES: 1. BACKGROUND MUSIC STOPS IN ALL ZONES WHENEVER A TALKBACK ZONE IS PAGED. 2. FOR CONNECTIONS TO TELEPHONE SYSTEM, SEE FIGURES 1, 3, 4, & 5. ZPM3 NOTES: 1. FOR CONNECTIONS TO TELEPHONE SYSTEM, SEE FIGURES 1, 3, 4, & 5. 2.
Connections Connections to the Paging System Bridging ZPM3 Units unit to connect to a specific zone. This master/slave relationship can be carried on for a large number of levels, as long as proper buffering is used. ZPM3 units can be linked together to provide access to more zones. Due to the potentially large number of inputs which may be presented to each preceding ZPM3, buffering requirements may become critical and the use of buffering amplifiers will have to be considered.
Features and Controls Shift Change/Emergency Call Volume Control The ZPM3 provides either a shift change tone or Emergency call (with alert tone) in all zones or in a zone group containing up three user-selected zones. (The default configuration sounds the tone in all zones. See section on Field Programming to program the zone group.) This feature overrides the standard paging features of the ZPM3. The type of tone is user-selected and may consist of a one-second burst or two dual-tone bursts.
9 MASTER ZPM3 T R INPUTS OUTPUTS T R BUFEX ZPM3 + MUTE 70V Figure 10 – Wiring Diagram, Multiple ZPM3 Configuration NOTES: 1. FOR CONNECTIONS OF THE MASTER ZPM3 TO THE TELEPHONE SYSTEM, SEE FIGURES 1, 3, 4, & 5. 2. FOR CONNECTIONS OF THE SLAVES TO THE PAGING SYSTEM, SEE FIGURES 6, 7, 8, & 9. 3. TALKBACK AMP CONNECTED ONLY TO ZPM3 UNITS WITH TALKBACK ZONES ASSIGNED.
ZPM3 TO LOOP START TRUNK TO NORMALLY OPEN CONTACTS OF SHIFT CHANGE CLOCK EXTERNAL 24V RELAY + 24V POWER SUPPLY NOTE: 1. CURRENT PAGE WILL BE RESET WITH ACTIVATION OF THE SHIFT CHANGE FEATURE. Figure 11 – Wiring Diagram, Shift Change Tone Feature ZPM3 PAGING AMP TO LOOP START TRUNK MUSIC IN MIC IN GND COM 25V 70V WMT1A 600 OHMS C.T. PUSH TO TALK DESK MIC + 24V POWER SUPPLY NOTE: 1. CURRENT TELEPHONE PAGE WILL BE RESET WITH ACTIVATION OF EMERGENCY ANNOUNCEMENT.
Field Programming Field Programming during the programming procedure. This also makes it possible to override any incorrect zone selections made during the programming process. IMPORTANT: The Subzone Lockout Switch (DIP Switch 3) must be set to Off (O) for Field Programming. Incorrect selection of zones for a zone group can be changed during programming, however, the zone group number must be correctly selected from the start.
Battery Backup System Operation Installation Paging a Zone The battery backup requires four (4) AA size nickel cadmium (NiCd) batteries, with an amp-hour rating of 450 mAhr or higher. To install the batteries, remove the four screws that secure the cover of the unit. Use needle nose pliers to carefully squeeze in the locking tabs on the four plastic standoffs that mount the PPC board. Gently pull the board off of each of the standoffs and place it aside.
13 K3 RI R R T T TI GS +TB -TB NRC1 NRC2 NRT NRR EM1 EM2 K2 1.5 50V + K2 300 300 300 BGM VOL .68 .01 TBIA TBOA TBIB TBOB POA POB POA POB BMOA BMOB BMBA BMBB .68 .01 300 PIA PIB 10K K2 K3 + 1.
Limited Warranty; Exclusion of Certain Damages The Bogen ZPM3 Zone Paging Module is warranted to be free from defects in material and workmanship for two (2) years from the date of sale to the original purchaser.
