Instruction manual

Projection
Remark
If the cartridges have been shaken
dur ing transport , especia lly with
partly filled reels, the film layers
may have
worked loose and conse-
quently l oading may not take place
automatically. As a safety precau-
tion, therefore, it is re commended
to tighten the films before projec-
tion by manually turning the reels
clockwise.
After
pushing back the pressure plate, insert the cartridges in the
desired order. As much as 6 cartridges can be inserted into the
projector . Insert them in two steps, as shown in the
illustration above.
Press the normal speed key (- ).
Lower the cartridge compartment
door . The film will automatically
load (if it does not , see remark
on opposite page).
8