User`s manual
Super8 Sound Cables
1/F Sync Adapter Cables
These adapters allow use of the Super8 Sound Recorder 1/F
switch cables (e.g. 4008S8SR, PCS8SR), including extension
cables, with our three cassette recorders.
To adapt 1/F S8SR cable to Scipio
..............................................
SKPA
To adapt 1/F S8SR cable to Philips 2209
.....................................
2209A
To adapt 1/F S8SR cable to Uher CR134
.....................................
U134A
Pilotone Sync Camera Cables
BNC Pilotone to Super8 Sound Recorder
................................
BNCS8SR
BNC Pilotone to XSD Recorder
......................................................
BNCXSD
Tuchel Pilotone to Super8 Sound Recorder
................................
TUCS8SR
Tuchel Pilotone to XSD Recorder
................................................
TUCXSD
XLR (Cannon) Pilotone to Super8 Sound Recorder
XLRS8SR
XLR (Cannon) to XSD Recorder
......................................................
XL RXSD
Cinema Pa the to XSD Recorder
...........................................................
CPXSD
Sync Extension Cables
Some of these are 1/F sync extensions only (2-wire cables),
others are full extensions of the Super8 Sound Recorder sync
socket (5-wire). The coiled cord versions stretch to 6 times
their coiled length.
12-foot camera 1/F sync extension (2-wire)
......................................
EC12
25-foot camera 1/F sync extension (2-wire). .
•
, • .
EC25
25-foot (4-ft-coiled) camera 1/F extension (2-wire)
ECC25
6-foot S8SR sync socket extension
................................................
DINDIN6
1/F Sync Resolver Cables
Resolver Cable for Super8 Sound Recorder
from Scipio
.................................................................................
from Philips 2209
............................
from Uher CR134 and Uher 124
.
from Elmo Cinematic Sound CR-1
from Farnell Tandberg
.................
Pilotone Sync Resolver Cables
Resolver Cable for Super8 Sound Recorder
from Super8 Sound XSD Recorder
...........................
DIN2RCA
from Nagra IV
......................................................................
RCNIV*
Adapt S8SR sync socket to 4 RCA jacks
...........................
DIN4RCA
Many of the older sync recorders provide only a weak
pilotone signal output (less than 1mV). These signals must be
boosted by an extra stage of preamplification before they
can be fed into the Super8 Sound Recorder. Two cables are
required, one from the pilotone recorder to the preamp
(
RCA phono input), and one from the preamp (RCA phono
output) to the Super8 Sound Recorder. If you have an
amplifier with a magnetic cartridge or tape head input, it can
probably be used. Super8 Sound sells a battery-operated
preamp, and a cable that connects the preamp to the
Super8 Sound Recorder.
Resolver Cable for Super8 Sound Recorder
from Arrivox Tandberg, Nagra III, Tandberg
11P, and Uher 1000N, 1200, to preamp . . .
TUCRCA
from Stellavox
......................................................................
RCS TEL *
Preamp for weak sync signals
...........................................................
PREAMP
Resolver cable from preamp to S8SR
...........................................
DIN2RCA
Multiple Recorder Resolver Cables
These cables allow up to six Super8 Sound Recorders to
synchronize with a single 1/F contact-switch signal (e.g. a
sync projector). Each cable has a locking 5-pin DIN female
connector (like the Super8 Sound Recorder sync socket)
and a number of 5-pin DIN males. Use for multiple track
sound mix with picture.
Two-recorder Resolver Cable
.................................................................
MRC2
Three-recorder Resolver Cable
................................................................
MR C3
Four-recorder Resolver Cable
.................................................................
MRC4
Five-recorder Resolver Cable
.................................................................
MRCS
Six-recorder Resolver Cable
......................................................................
MRC6
Sync Projector Cables
Super8 Sound Sync Projectors usually come supplied with
sync cables (DIN2MINI). Owners of the sync Elmo ST1200
also require this cable.
Super8 Sound Sync Projector Cable
...........................................
DIN2MINI
Audio Cables
Audio Resolver Cables
The Sync Resolver Cables above carry the sync signal from
a sync tape recorder or a sync sound projector to the sync
socket of the Super8 Sound Recorder. The audio signal is
carried by the Audio Resolver Cables listed here. They
connect to the AUX (miniphone) input of the Super8 Sound
Recorder. We strongly recommend the use of an equalizer
during resolving. To connect to an equalizer you should buy
a miniphone-to-RCA phono adapter (MPRCA). You also
need an RCAMINI cable to connect the equalizer to the
Super8 Sound Recorder AUX input.
Sync sound can also be resolved to fullcoat from the
magnetic edge stripe of a single-system film. The sync signal
is carried by the sync cable included with all sync projectors
sold by Super8 Sound, the audio by the audio resolver
cables listed below.
An equalizer is essential.
Audio Resolver Cable for Super8 Sound Recorder
from Scipio, Philips 2209, Stellavox, Uher CR134
ARCDIN
from Uher CR134 (Stereo)
...........................................
ARCU134
from Arrivox-Tandberg, Nagra Ill, Nagra IV,
Uher 1000N, 1200.
................................................................
ARCBAN
—
from Tandberg 11P, Farnell-Tandberg,
Elmo Cinematic Sound, Fuji Puls-Sync
...........................
ARCMINI
—
from all Eumigs, Bolex SP8, SP80 Special,
SM80, Silma Bivox D-Lux
...........................................
DIN2MINI
from Elmo ST1200, Sankyo 600
................................
MINIMINI
—
from Kodak Ektasound 245, Supermatic 70.
MINIPHON
—
from Kodak TVM100A
......................................................
MINIXLR
—
from Bolex SM8 (and other projectors
with only a 2-pin DIN output)
......................................
ARCSPKR
—
Adapter, to connect Audio Resolver Cables
to RCA inputs of an equalizer
...........................................
MPRCA
—
Cable from equalizer to Super8 Sound Recorder
RCAMINI
Audio Transfer Cables
While Audio Resolver Cables carry sound
to
fullcoat, Audio
Transfer Cables carry sound
from
fullcoat, to a magnetic edge
stripe for example, or to a sync tape recorder for a safe copy
of an important track. Use an RCAMINI cable if the first
step of the transfer is to an equalizer. If the transfer is from
a final mixed master composite track, equalization is not
generally needed.
Audio Transfer Cable from Super8 Sound Recorder
—
to all Eumigs, Bolex SP80 Special, SP8, SM80,
Slima Bivox D-Lux
...........................................................
DIN2MINI
—
to Elmo ST1200, Sankyo 600
......................................
MINIMINI
—
to Kodak Ektasound 245, Supermatic 70,
TVM100A, Bolex SM8
...........................................................
RCAMINI
—
to most quarter-inch tape recorders
................................
RCAMINI
RCSKP
RC2209
RCU 134
RCELMO*
RCFT*
Super 8 Sound
,
Inc
.
60 95 Harvey Street, Cambridge.
Mass.
02140