Professional HD IP Camera Quick Start Guide Please read this manual carefully before using this product and keep it for future reference.
Note: Due to the continuous updating of the products and software,there may have some discrepancy between the operating guide and APP interface.All the instructions are subject to the actual operation interface.If you want to know if you can update the fireware,pls contact technical team. Service Guarantee If you have any other questions,pls contact the customer service email address at the first time.
1. How to first add WIFI IP Camera by Camhipro APP (Connect Network cable)? 1.1 Connection network cable to router and plug in power adapter. 1.2 Connect LAN cable and power to camera, it needs about one minute to self checking and then start working. Tips: The router must be able to connect to the internet! Please use the standard power supply. 1.3 Network indicator light (green): always flashing means network data transmission is normal. 1.
3
4
2. How to Connect WiFi IP Camera by Hot-Spot Camhipro APP (No Network Cable)? 2.1 Go to your cell phone’s Wi-Fi Setting -- search Wi-Fi signals -- connect the Wi-Fi. The name of Wi-Fi Hot Spot is the UID on the camera (Wi-Fi name:IPCAM-900139 Camera default Wi-Fi Hot Spot password: 01234567 Tips: 1. Do not connect network Cable; 2. Only when the mobile phone is 3-5 meters away from the camera can the hot spot signal be detected, please close the mobile data when connect the camera Hot Spot; 3.
Step1 Step2 Step4 Step3 Step5 2.
Step1 Step2 Step3 3. WIFI IP Camera How to reset password when forget password? 3.1 Method B: Please restore the camera to factory settings: Method 1: Press the reset button for more than 10 seconds and make sure that the camera remains on. After about 60 seconds, the camera will successfully restore the factory settings, and then set up WiFi for the camera on the phone again.
Method 2: Open the mobile APP → enter the camera settings → select "system settings" → click "restore factory settings" 3.2 Method A: When your PC and camera are in the same local area network (usually means they are connected to the same router), you can reset the camera password on the "SearchTool". Step 1. Open "SearchTool" on the PC. Step 2. Click "Refresh" to search the camera IP, then select the IP address and click "Next". Step 3.
1、Trigger tracking opening method for guard position area: Rotate the dome to the designated important monitoring area, set the preset position 92, and then call the preset position 92 to start the humanoid tracking function in the current area. If the target is lost, it will return to the initial setting after 3-8 seconds Track location. 2、Trigger tracking opening method in cruise line area: The user can set 1-16 preset positions according to the actual scene, and then call the No.
5. Camera Turn ON/ OFF Red-Blue Light s Guider Android setup method Swipe to the third page 1 2 3 Enter "37" in this preset setting, click "Setting" to turn off the red and blue lights; click "transfer" to turn on the red and blue lights.
IOS setting method Click to enlarge to enter the full-screen interface, and then click "..." in the upper right corner to enter the tool options. 2 1 3 4 Select preset position setting Enter "37" in this preset setting, click "Setup" to turn off the red and blue lights; click "Call" to turn on the red and blue lights.