User Manual

User’s Guide
This locking ash cable is made with high-quality,
wear-resistant insulated wires. It connects your
battery pack to your ash. The locking mechanism
ensures a secure connection between the battery
pack and the cable. This cable is compatible with
major battery pack brands, including Quantum,
Lumedyne, Dynalite, and Impact.
Warnings
• Use only as instructed. Both terminal connectors
output high voltage.
• Only connect your ash unit to your battery pack
with a cable that is compatible with both.
• Do not use if any wire is exposed as a result of
damage or wear.
• Keep out of reach of children.
• Make sure the cable is rmly connected at both
ends when using your battery pack.
• Unplug this cable from the sockets on the
battery pack and ash unit when it is not in use.
Locking Flash Cable
1
2
3
1. Plug the 5-pin metal connector of the cable rmly
into the output socket on your battery.
2. Be sure the cable is securely seated in the socket,
and rotate the locking collar to the locked position.
3. Plug the other end of the cable securely into the
compatible power port on your ash unit.
Connecting Your Battery Pack to Your Flash
BO-1006_1007 Instructions Card.indd 1 5/28/14 2:54 PM