User Manual

Installing Batteries

OPEN

4. Insert the battery holder into the pack, press the

battery holder lock release button, and slide the holder

lid in the opposite direction of the arrow until you hear

a click and the holder stays rmly in place.

Important!

• Using two sets of batteries (a total of eight cells) will enable faster ash recycle times than using a single

set of four batteries.

• To remove batteries from the holder, push each cell out of the bay where it is installed from the back. This

method lets you remove the battery easily, without touching the contacts.

• Replace all four batteries of each set at the same time. Do not mix battery types or brands, or used and

new batteries together.

• Always install one or two sets of four batteries each, and make sure that each set of four batteries is

installed in one set of battery bays, accessible from a single side of the holder. Do not install fewer than four

batteries in one of the sets of battery bays.