User Manual
Connecting Your Compact Battery Pack
|
13
Important!
• The ash must have batteries installed before connecting it to the Compact Battery Pack. Most ash units
require the standard batteries to be installed in order to power the display functions that allow the ash to
work.
• You may need to activate a setting or custom function on your ash unit to make it draw power only from
the battery pack and not the internal batteries. Refer to your ash unit’s instructions for information about
relevant settings.
Disconnect the Compact Battery Pack from your ash unit before storing it. To disconnect it, turn the ash
unit off and remove the pack’s connector from the ash unit’s power port. When the Bolt Battery pack is
disconnected from the ash, it is off.