User Manual
10
|
Connecting Your Cyclone|DR
Connecting Your Bolt
Cyclone DR Power Pack to
Your Flash
You can use the Cyclone DR to power a wide range
of ash units. its level of charge can be checked,
you must use a compatible connection cable. Cables
sold by some ash and battery pack manufacturers
are interchangeable with Bolt cables, but other ash
brands use a different connector type. Make sure you
select the right one.
Important! Load your ash unit with its standard
batteries before connecting it to the Cyclone DR.
You may need to set your ash unit to recycle by
drawing power from the Cyclone DR only to avoid
draining the installed batteries. Check your ash
unit’s manual for details on the relevant setting.
1