User Manual

Connecting Your Cyclone|DR

To connect your Cyclone DR to your ash unit:

1. Plug the metal connector of the connection

cable rmly into one of the output sockets of the

Cyclone DR.

2. If using a cable with a locking mechanism,

rotate the locking collar on the terminal to

secure the cable.

3. Plug the other end of the connection cable

securely into the compatible power port on your

ash unit.

4. Press the power button on the Cyclone DR and

wait for the Status and battery LEDs to turn on,

then power on your ash.

To disconnect your Cyclone DR from your ash unit:

1. Press the power button until the Status and battery LEDs turn off.

2. If you’re using a cable with a locking mechanism, rotate the locking collar to the unlocked position.

3. Unplug the connection cable from the battery pack.