User Manual

14
|
Using Your Cyclone|DR
Padded feet. Two rubberized feet give the Cyclone DR stability and protection when you set it down.
Belt clip. One of the easiest ways to carry the Cyclone DR is to attach it to your belt with the included
clip. When you won’t be carrying the pack on your belt, you can give in a cleaner prole by removing the
clip. To do this, loosen the screws securing it with a Phillips screwdriver, remove the clip, then tighten the
screws again.
Shoulder strap. Thread the shoulder strap through the built-in lugs on the
Cyclone DR
and through the strap
clips and buckles, as shown here. After threading it, pull it tight to take up any slack. Always make sure that
your strap is attached securely; dropping the
Cyclone DR
can damage it.