User Manual

22
|
VM-1020 Transceiver Settings and Controls
VM-1020 Transceiver Settings and Controls
Press and hold the power button [ ] until the Flash Test button lights up, and the LCD displays the flash
settings. Any changes to the settings will be saved after eight seconds of inactivity. Pressing the Info [ ] and
Mode [ ] buttons at the same time will reset all setting and parameter changes.
Group Mode
Group mode allows you to use automatic TTL settings
or have manual control over groups A/B/C. Set flash
power, focal distance, or overall group compensation.
There are three flash modes per group: TTL, M, or
O. TTL uses automatic settings from the camera
with user control over flash compensation. Manual
allows you to set the flash power of the group. O will
disable a group.
GROUP
+0.1
A
B
C
M
TTL
TTL
+0.3
+0.3
MASTER CH01 9999
Auto
Auto
Auto
1/128
Group Mode Zoom
Flash Groups Flash Modes Flash Adjustments