User Manual

VM-1020 Transceiver Settings and Controls

1. Press the Mode [ ] button to switch to Group mode.

2. Press the Group [ ] button to highlight and enter group selection, and use the Adjustment dial to select the

groups A/B/C. Make sure the VM-1010 ﬂashes are set to the same group.

3. Press the Set [ ] button once to select the group ﬂash mode. Use the adjustment dial to select TTL, M,

or O.

4. Press the Set [ ] button again to change the ﬂash compensation or power. Use the adjustment dial to

adjust negative (-) or positive (+) compensation or power values.

5. Press the Set [ ] button again to adjust the zoom focus parameter. Use the adjustment dial to set zoom

focus to Auto or manually adjust between 18 and 200 mm.

6. Press the Set [ ] button again to conﬁrm the group settings.