User Manual

VM-1020 Transceiver Settings and Controls

5. Press the Set [ ] button again to conﬁrm the group A:B settings.

You can change Group C settings according to the instructions in Group Mode above.

To set the wireless channel and ID number, as well as the overall group compensation, see Setting the Wireless

Channel, Setting the Wireless ID, and Global EV Compensation above.

Slave Mode

In this mode, the transceiver acts a slave, and it

receives ﬂash information from the master unit. Use

this mode when you need to wirelessly trigger a

speedlight or camera.

GROUP：A 　CH02

SLAVE 9999

Flash Group Channel

Slave Mode Wireless ID