User Manual

Troubleshooting

Problem Solution

The VM-160 is stuck in the

camera hot shoe.

• Make sure that the mounting foot lock is released. (Page 14)

The VM-160 is turned on and is

in Light mode but won’t light up.

• Make sure that fresh batteries are installed and are in the proper

orientation. (Page 10)

The VM-160 is turned on and is

in Flash mode but won’t re.

• Make sure that fresh batteries are installed and are in the proper

orientation. (Page 10)

• Make sure the control unit is securely attached to the camera. (Page

12)

• Make sure that the electrical contact on the foot of the control unit is

not dirty. Clean it and try again.

The VM-160 is rotating right

or left while the camera is

focusing.

• Your lens has a rotating front element. Use manual focus.