User Manual

Troubleshooting
|
17
Troubleshooting
Problem Solution
The battery indicator uctuates
between full and empty when
repeatedly reinstalling the same
batteries.
This is normal and may happen when the batteries are nearly
exhausted. Replace the batteries.
The VM-210 is stuck in the
camera hot shoe.
Make sure that the locking wheel is released.
The VM-210 is turned on and is
in light mode but won’t light up.
Make sure that fresh batteries are installed and are in the proper
orientation.
The VM-210 is turned on and is
in Flash mode but won’t re.
• Make sure that fresh batteries are installed and are in the proper
orientation.
• Make sure the control unit is securely attached to the camera.
• Make sure that the electrical contact on the foot of the control unit is
not dirty. Clean it and try again.