User`s manual
16
|
Turning on the Flash and Firing a Test
Mounting the VS-510C on the included stand:
You can mount the VS-510C on the included stand in the same way you would mount it on your camera. This
allows you to set the ash up on a at surface, or to attach it to a tripod head, light stand, or clamp that has a
compatible ¼-20 screw mount.
Turning on the Flash and Firing a Test
To turn the ash on, simply slide the power switch to the On position.
When the ash is ready to re, the Ready light will glow red. If the ash is mounted on your camera, a ash
icon will also appear in the camera’s viewnder.
To re a test ash, press the Ready light / Test button.