User`s manual
Using Flash Exposure Compensation
|
21
2. Press the FEL button on your camera. The ash will re a test shot and lock its output level.
3. Make sure the FEL indicator is showing in your camera’s viewnder before you take your photograph.
Reframe your image as desired.
For more information about the ash exposure lock feature, consult your camera’s manual.
Using Flash Exposure Compensation
In automatic TTL mode, you can use ash exposure compensation to adjust the VS-510C’s ash output
incrementally, just as you would adjust exposure with the exposure compensation function on your camera.
To apply ash exposure compensation, press the ash exposure compensation button on your camera and
adjust the ash exposure level up or down with your camera’s controls.
The ash exposure compensation range and controls vary between different camera models. Consult your
camera’s manual for more information about this feature.