User Manual
16
|
Turning on the Flash and Firing a Test
Mounting the VS-560C on the included stand:
You can mount the VS-560C on the included stand in the same way you would mount it on your camera. This
allows you to set the ash up on a at surface, or to attach it to a tripod head, light stand, or clamp that has a
compatible ¼˝-20 screw mount.
Turning on the Flash and Firing a Test
To turn the ash on, simply slide the power switch to the On position.
When the ash is ready to re, the Ready light will glow red. If the ash is mounted on your camera, a ash
icon will also appear in the camera’s viewnder.
To re a test ash, press the Ready light / Test button.
Automatic power-saving function: After 3 minutes of inactivity, the ash will automatically enter power-
saving mode to conserve battery life. The LCD will display a single OFF indicator, and the Ready light will turn
off. To reactivate the VS-560C, simply press any button on the control panel, or tap your camera’s shutter-
release button. During long periods of inactivity, it is recommended that you use the power switch to turn the
ash off completely.
LCD illumination: When a button is pressed, the LCD will be illuminated for about 5 seconds.