User Manual

20
|
Locking Flash Exposure
To activate high-speed sync mode on the VS-560C,
press the Mode button repeatedly to cycle through
the ash modes until the high-speed sync mode
indicator appears on the LCD.
To turn high-speed sync on or off, press the up or
down buttons. “ON” will appear in the top right
corner of the LCD when high-speed sync mode is
activated, and “--” will appear when high-speed
sync mode is deactivated.
Locking Flash Exposure
In automatic TTL mode, you can lock the ash output level that is optimal for specic elements of your scene
by using the ash exposure lock (FEL) on your camera. To lock ash exposure, follow these steps:
1. Position the element of your scene that you want to be correctly exposed in the center of your viewnder.
2. Press the FEL button on your camera. The ash will re a test shot and lock its output level.
H