User Manual
18
|
Using the Automatic TTL Flash Mode
Using the Automatic TTL Flash Mode
When the VS-570C is mounted on a compatible camera, it can set the appropriate ash level automatically, in
conjunction with the camera’s through-the-lens (TTL) metering system. To use the automatic mode, mount the
ash on the camera and follow these steps:
1. Each time you turn the ash on, it will be in automatic mode. This will be conrmed by the TTL mode
indicator on the LCD. If the ash has been set to another mode, press the Mode button repeatedly to cycle
through the ash modes until “TTL” or “E-TTL” is shown on the LCD.
2. Make sure your camera is set on a programmed or automatic mode, or on a priority mode such as
aperture priority.
3. Press the shutter-release button on your camera halfway to ensure that the camera is communicating
with the ash. The camera’s aperture setting will be displayed on the ash LCD, and a ash icon will
appear in the camera’s viewnder.