User Manual

Using Your VS-570C as a Wireless Master
|
33
Setting the VS-570C as a wireless master involves pressing the Mode button to advance from one setting to
the next, as well as using the up and down navigation buttons to adjust or enable the settings. The settings
that you can adjust or enable are wireless master mode, master ash on/off, channel number, high-speed sync
on/off, group mode, and each group’s power, ratio, or FEV.
To set the VS-570C as a wireless master, follow these steps:
1. Enable wireless master mode. Make sure the
VS-570C is in TTL mode.
2. Press and hold the Mode button until the wireless
master summary screen appears. For more
information on the summary screen, refer to The
TTL Master Summary Screen on page 44.
TTL
EV+
EV-
GROUP BGROUP A GROUP C