User Manual
Turning On the Flash and Firing a Test
|
15
Turning On the Flash and Firing a Test
To turn the ash on, simply slide the power switch to the On position.
When the ash is ready to re, the Ready light will glow red. If the ash is mounted on your
camera, a ash icon will also appear in the camera’s viewnder.
To re a test ash, press the Ready light / Test button.
Automatic power-saving function: After 3 minutes of inactivity, the ash will automatically enter
power-saving mode to conserve battery life. The LCD will display a single OFF indicator, and the
Ready light will turn off. To reactivate the VS-570F, simply press any button on the control panel, or
tap your camera’s shutter-release button. During long periods of inactivity, it is recommended that
you use the power switch to turn the ash off completely.
LCD illumination: When a button is pressed, the LCD will be illuminated for about 5 seconds.