User Manual

Extended Interface

You can connect your VS-570F to an external power source or PC sync via the extended interface on the side

of the ash.

External power source: An external power source, such as the Bolt Cyclone Battery Pack, can greatly

increase the battery life of your ash and reduce the recycle time in between ashes.

Important: When an external power source is plugged into the ash, the AA batteries must still be in the ash

in order for it to operate.

PC Sync: You can synchronize your VS-570F with a camera by running a PC cord between your camera and

the VS-570F’s PC sync socket. This lets you position the ash away from the camera, thus giving you more

lighting options.

Note: The PC sync socket on the VS-570F is only for synchronous signal input, and not output.

To access the extended interface, follow these steps:

1. Pull back the contact cover on the side of the ash.

2. Plug the cable into the corresponding socket.

A. For an external power source, plug the Bolt BO-1011 power cable (sold separately) into the external

power source socket.

B. For PC sync, plug a PC cord into the PC sync socket.