User Manual

Using Flash Exposure Compensation - Using the Manual Flash Mode

Using Flash Exposure Compensation

In automatic TTL mode, you can use ash exposure compensation to adjust the VS-570F’s ash output

incrementally, just as you would adjust exposure with the exposure compensation function on

your camera.

To apply ash exposure compensation, press the

up or down buttons on the ash to increase or

decrease ash exposure by 1/2 stop—up to 3 stops

total. The LCD will display EV+ or EV- next to the

exposure value to indicate whether it is increased

or decreased.

Using the Manual Flash Mode

You can also set the VS-570F’s ash output level manually for greater creative control over your images. Seven

manual settings are available: 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, and 1/64. The 1/1 setting is the full-power ash,

and each successive setting halves the light output. To use the manual mode, turn the ash and camera on

and follow these steps:

TTL

EV+