User Manual

Controlling Flash Coverage (Zoom)

When the ash head is angled up or swiveled to the side, the zoom position is set to 50mm. The “50mm”

indicator will ash on the LCD, and the zoom can then be manually adjusted (see below).

Note: Older cameras that do not offer digital data transmission with the ash do not support the automatic

ash zoom control. The manual zoom control must then be used.

Manual zoom control: To manually select a setting that corresponds to the focal length of your lens, press

the Zoom button to make the M indicator for manual mode appear. Then continue to press the button to cycle

through the available focal length settings.

Note: Manual zoom can also be used to achieve special effects, such as using the 105mm setting with a wide-

angle lens to produce a vignette.

Using the ash with wide-angle lenses: When you have a lens wider than 24mm mounted on your camera,

you can use the built-in diffuser panel to give the ash an angle of coverage equivalent to that of an

18mm lens.