User Manual
Turning on the Flash and Firing a Test
|
15
Turning on the Flash and Firing a Test
To turn the ash on, simply slide the power switch to the On position.
When the ash is ready to re, the Ready light will glow red. If the ash is mounted on your camera, a ash
icon will also appear in the camera’s viewnder.
To re a test ash, press the Ready light / Test button.
Automatic power-saving function: After 3 minutes of inactivity, the ash will automatically enter power-
saving mode to conserve battery life. The LCD will display a single OFF indicator, and the Ready light will turn
off. To reactivate the VS-570N, simply press any button on the control panel, or tap your camera’s shutter-
release button. During long periods of inactivity, it is recommended that you use the power switch to turn the
ash off completely.
LCD illumination: When a button is pressed, the LCD will be illuminated for about 5 seconds.