User Manual

22
|
Controlling Flash Coverage (Zoom)
The available zoom positions are 24mm, 28mm, 35mm, 50mm, 70mm, 85mm, and 105mm.
Automatic zoom control: When you turn the VS-570N on, the zoom mode indicator on the LCD will show an A
to indicate that it is in automatic mode and at the default 35mm position. When you press the shutter-release
button on your camera halfway to initiate communication between the camera and the ash, the ash zoom
will adjust to match the lens focal length and the closest zoom setting will be displayed on the LCD. If you
zoom your lens, the ash zoom setting will change automatically.
When the ash head is angled up or swiveled to the side, the zoom position is set to 50mm. The “50mm”
indicator will ash on the LCD, and the zoom can then be manually adjusted (see below).
Note: Older cameras that do not offer digital data transmission with the ash do not support the automatic
ash zoom control. The manual zoom control must then be used.
Manual zoom control: To manually select a setting that corresponds to the focal length of your lens, press
the Zoom button to make the M indicator for manual mode appear. Then continue to press the button to cycle
through the available focal length settings.