User Manual

Setting the Master Flash

Setting the VS-570N as a wireless master involves pressing the Mode

button to advance from one setting to the next, as well as using the up and

down navigation buttons to adjust or enable the settings.

1. Enable wireless master mode. Make sure the VS-570N is in

TTL mode.

2. Press and hold the Mode button until the wireless master summary

screen appears. For more information on this, refer to Wireless Master

Summary Screen on page 34.

3. Turn the master ash on or off. Choose whether you want the

master ash to re as part of the exposure. Press the Mode button so

only the master ash on/off selector appears onscreen. Use the up or

down navigation buttons to select on or off.

4. Select the wireless channel. Press the Mode button and then use

the up or down navigation buttons to cycle through channels 1–4.

TTL

EV+

EV-

GROUP BGROUP A GROUP C

EV+

EV-

EV+

EV-