User Manual
34
|
Using the VS-570OP as a Wireless TTL Slave
Using the VS-570OP as a Wireless TTL Slave
You can set the VS-570OP as a wireless TTL slave for Olympus/Panasonic, Nikon, and Canon TTL systems. This
allows you to use an Olympus/Panasonic, Nikon, or Canon wireless TTL master to control the VS-570OP as a
slave ash unit.
To set the wireless TTL slave mode, follow these steps:
1. Make sure the master ash or controller on your camera is turned on and set to automatic TTL mode.
2. Select the appropriate group and channel on the master unit. Consult the master’s manual for more
information on this topic.
3. Press the VS-570OP’s Mode button repeatedly to cycle through the
ash modes until the Wireless TTL mode icon appears on the LCD.
Use the up or down navigation buttons to select Olympus/Panasonic,
Nikon, or Canon TTL slave modes.
A. For Olympus/Panasonic TTL slave mode, the O-TTL indicator
will appear onscreen. Press the Mode button to conrm.
TTL
A