Owner`s manual

８
SIGN
NAME
TYPE
M
Motor
3 phase
Y90L-4
Single phase
YC100L-4
KM
AC magnetic contactor
LC1-D129 (3 phase0
LC1-D259(single phase)
KA1
Relay
CA2-DN22
TC
Transformer
JBK3-63
SA1
Power switch
HZ5B-10/2D009
SB1
Emergency stop button
LA25-01ZS
SB2
Job button
LA25-10
HL
Power indicator light
AD11-30/20
5.LUBRICATION SYSTEM
(A) Head stock
Ensure that the head stock is filled to the level of the relevant oil sight glass with
Tellus 32 of Shell oil.
For exchanging the oil in headstock , remove all oil by taking off the drain plug ,
which is fitted at the bottom left hand end of the head stock , accessible after removal
of the end cover and the change gears with swing frame . Open the headstock cover
to fill the oil, check oil level weekly and change the oil 3 months after first use , then
change it once a year .
(B)Quick change gearbox
The bearings and gears should be oiled daily from the top . Remove the cover to
expose the filling nipples.
(C)Apron
Ensure that the apron is filled to the correct level of the oil sight glass with
Tellus 32 of shell oil .
Check the oil level weekly and first oil change after 3 months use , farther oil
change once a year .
For exchanging the oil in apron , drain away all oil by taking off the drain plug ,
which is fitted on the bottom of the apron .