Infrared Mobile Digital Scouting Camera User’s Manual Boly Guard,SG550M
Content Instruction ...............................................................................................................................1 1.1 General Description........................................................................................................1 1.2 Camera Body Interfaces.................................................................................................1 1.3 Remote Control...........................................................................................
4.4 File Numbering .............................................................................................................16 4.5 Firmware Upgrade .......................................................................................................16 AppendixⅠ: Technical Specifications ........................................................................................17 AppendixⅡ: Parts List..........................................................................................................
Star Hunter ® 1 Instruction M10 1 Instruction 1.1 General Description This camera, a digital scouting camera with MMS function, is a surveillance camera working automatically. It can be triggered at once by any movement of human (or animals) in a certain region of interested (ROI) monitored by a high sensitive Passive Infrared (PIR) motion sensor, and then automatically captures high quality pictures (up to 5M pixels) or records video clips (VGA).
Star Hunter ® 1 Instruction M10 1. DC in 2. Tilt adjuster 3. Theft-proof lock 1.3 Remote Control The remote control is an input device of the camera and is primarily used for customer settings and password input. This is an infrared type wireless remote control. The maximum remote distance is 9 meters. There are fifteen buttons on the remote control. 1.3.
Star Hunter 1 0 ® 1 Instruction M10 : 1./:@_ : 0+- Press the punctuation “*” for laser pointer. 1.4 Shooting Information Display When the camera is turned on (the power switch is slid to ON or TEST position), the shooting information will be displayed in the monitor. 1.5 MMS function This camera can send pictures instantly to your mobile device via GSM network.
Star Hunter ® M10 1 Instruction Video AVI File format FAT32 Here are some important notices. You don’t need to concern about the file system format of the camera unless you have problems with reading the SD-card by your other equipments. If this happened, please format the SD-card in the camera or in a computer at first and then reinsert the card into your camera to make a try.
Star Hunter ® M10 2 Cautions 2 Cautions ★ The working voltage of the camera is 6V. The camera is supplied by four or eight AA batteries. ★ Please install batteries according to shown polarity. ★ Please unlock the write-protect before inserting the SD-card. ★ Please insert the SD-card when the power switch is at OFF position before testing the camera. The camera has no internal memory for saving images or videos.
Star Hunter ® M10 3 Quick Introductions 3 Easy Operations 3.1 Power Supply To supply power for the camera, four or eight AA size batteries are needed. Open the bottom cover. Confirm that the power switch is at the OFF position, pull out the battery depot. Load the fully charged batteries into the depot according the polarities sign shown below. Push back the depot to the battery chamber. The following batteries with 1.5V output can be used: 1.
Star Hunter ® M10 3 Quick Introductions monitoring area by laser pointer. Related information, please refer to section 4.3. After switching on the camera, the motion indication LED (red) will blink for about 10s. The 10s is a buffering time before autonomic capturing photos or videos, e.g. for closing and locking the bottom cover, fixing the camera on a tree and walk away. In ON mode, it is unnecessary to use the remote control.
Star Hunter ® 4 Advanced Operations M10 4 Advanced Operations From the basic operations of the camera in previous chapter, we know that the camera has three basic operation modes: 1. OFF mode: Power switch is at OFF position. 2. ON mode: Power switch is at ON position. 3. TEST mode: Power switch is at TEST position. In the above three modes, the OFF mode is the specified safe mode when replacing the SD-card or batteries and transporting the camera.
Star Hunter ® M10 MMS Mode Send To 4 Advanced Operations supports four band :850MHz, 900MHz, 1800MHz and 1900MHz. You should set the right MMS setting parameters . The settings of MMS: URL, APN, IP and Port. Please contact the network service provider if you are not familiar with the settings. There are 3 MMS modes: “Manual ”works in TEST mode , “Daily report”and“Instant”work in ON mode. 1)“Manual”: Choose“Manual” in Test mode.
Star Hunter ® 4 Advanced Operations M10 Password Default Set empty. For the security sake, enter a password each time when entering Test mode. The default password is 0000. You could choose OFF to stop this function. Restore all customer settings to default values. 4.1.
Star Hunter ® M10 4 Advanced Operations c) Press LEFT or RIGHT to select Video. d) Press OK to save the current setting and the option will be un-highlighted. Press MENU to cancel setting and return to info display. 4.1.4 Format SD-Card The system will delete all images or videos stored in the SD-card after formatting, make sure that you have made a backup of important data. a) Press MENU to display the setting menu. b) Press UP or DOWN to select Format.
Star Hunter ® M10 4 Advanced Operations e) Press OK to save all current setting and return to info display. Press MENU to cancel setting and return to info display. 4.1.8 Set Photo Burst The following shows how to set photo burst to 3 Photo , provided that the previous option is 1 Photo: a) Press MENU to display the setting menu. b) Press UP or DOWN to select Photo Burst. c) Press LEFT or RIGHT to select 3 Images. d) Press OK to save the current setting and the option will be un-highlighted.
Star Hunter ® M10 4 Advanced Operations Press MENU to cancel setting and return to info display. 4.1.13 Set Timer Please note that the start and stop time can only be effective when the timer is set as On. Provided that the camera should work from eight a.m. to five p.m., the steps are as following: a) Press MENU to display the setting menu. b) Press UP or DOWN to select Timer. c) Press LEFT or RIGHT to select On. d) Press OK to enter into submenu.
Star Hunter ® M10 4 Advanced Operations IP: (Max. 16 characters) Port: (Max. 6 characters) Account and Password :( Some telecom operators need to set account and password to launch MMS.) Number: (Max. 24 characters for each phone number) Email: (Max.
Star Hunter ® M10 4 Advanced Operations c) Press LEFT or RIGHT to select On. d) Press OK to enter into submenu. e) There are three inputs for key in new, old and confirm password, press ﹟ to switch between each inputs. Press number buttons to key in the digits. Press UP to delete. f) Enter OK to save all current setting and return to info display. If the inputs are blank, the password will not be changed; if key in correctly, the new password is set.
Star Hunter ® 4 Advanced Operations M10 Press MENU to cancel and return to playback. Please note that after deleting a picture or a video file, the deleted files can’t be restored! Furthermore, in order to delete all images and video clips in the SD-card, it is suggested to format the SD-card, please refer to 4.2.4. 4.2.3 Send MMS Manually The Send MMS option will only be shown when the setting item MMS Mode is selected as Manual. a) View the images and select one to send.
Star Hunter ® M10 AppendixⅠ: Technical Specifications AppendixⅠ: Technical Specifications 5MP Color CMOS Image Sensor F/NO=3.0 FOV(Field of View)=52° Lens 6-12m IR-Flash Display Screen 1.7” LCD Memory Card From 8 MB to 16 GB Picture Resolution 5MP = 2560×1920 3MP = 2048×1536 640×480 (16fps) 320×240 (20fps) Video Resolution Multi Zone PIR Sensor Adjustable (High/Normal/Low) PIR Sensitivity 1.2s Trigger Time 0.30 kg Weight -10 - +50°C / -30 - +70°C Operation/Storage Tem. 1s – 60 min.
Star Hunter ® M10 Appendix Ⅱ: Parts List AppendixⅡ: Parts List Part Name Digital Camera Wireless Remote Control USB Cable TV cable Belt User Manual Antenna Quantity One One One One One One One Page 18
Compliance with FCC Regulations FCC Section 15.105 (b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.