User Manual

Mobile Camera MG582 4 Advanced Operations
Page 11
b) Press UP or DOWN to select Format.
c) Press OK to choose Enter to enter into submenu.
d) Press LEFT or RIGHT to select Yes. Yes will be highlighted.
e) Press OK to start formatting the SD-card. During formatting, the display
screen will show a message “Please Wait” as below.
Press MENU to cancel setting and return to info display.
4.1.4 Set Photo Size
This parameter has two values: 5 mega pixels (5M Pixel or 5MP) and 3 mega
pixels (3M Pixel or 3MP). The default value is 5 mega pixels. The following shows
how to set pixel size as 3M Pixel provided that the previous option is 5M Pixel:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Photo Size.
c) Press LEFT or RIGHT to select 3M Pixel.
d) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.5 Set Video Size
This parameter also has two values: VGA (640×480）and QVGA (320×240）.
The default value is “640x480” (VGA). The following shows how to set video size as
320×240 provided that the previous option is at 640×480:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Video Size.
c) Press LEFT or RIGHT to select 320×240.
d) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.6 Set Date and Time
You can change the date and time of the device by setting this parameter when
necessary, e.g., after every battery change. The date format is month/day/year, the
time format is hour: minute: second. The valid value for year is between 2009 and
2050.
Provided that the date and time are needed to be set to November 15th, 2010 and
half past ten, the steps are as following:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Set Clock.
c) Press OK to enter into submenu.
d) Press LEFT or RIGHT to select item, press UP or DOWN to change the value.
e) Press OK to save all current setting and return to info display.
Press MENU to cancel setting and return to info display.
4.1.7 Set Photo Burst
Please Wait!