Hunting/Security Camera User’s Manual MG982K‐10M Boly Media Communications (Shenzhen) Co., Ltd.
Content 1 Instruction.......................................................................................................1 1.1 General Description...............................................................................1 1.2 Application............................................................................................. 1 1.3 Camera Overview.................................................................................. 2 1.4 Shooting Information Display...................................
MG982K-10M 1 Instruction 1 Instruction 1.1 General Description This camera, a digital scouting camera with MMS function, is a digital infrared surveillance camera, triggered by any movement of human or animal monitored by a high sensitive Passive Infrared (PIR) motion sensor, and then automatically captures high quality pictures (up to 10M pixels) or records video clips (720P HD). It sends pictures instantly to your mobile device or e-mail via GSM/GPRS/MMS network.
MG982K-10M 1 Instruction Take a few moments to familiarize with the camera controls and displays. It is helpful to bookmark this section and refer to it when reading through the rest of the manual.
MG982K-10M 1 Instruction Figure 2 Inner panel view Figure 3 Diagram of camera interfaces Page 3
MG982K-10M 1 Instruction 1.4 Shooting Information Display When the camera is turned on (the power switch is slid to TEST position), the current settings will be displayed on screen. Figure 4 Shooting information display is the correct SIM card status and the available space of SD card should be a none zero value. 1.5 Two Way Communication mode, you can set SMS control submenu as When in Hunting mode ON to open the two way communication function.
MG982K-10M 2 Cautions 2 Cautions � The working voltage of the camera is 6V. The camera is supplied by the power adapter or 8 AA batteries. � Please install batteries according to shown polarity. � Please insert the SD card before power on camera. The camera has no internal memory for saving images or videos. The camera will not work if there is no SD card. � Please make sure that your SIM card supports the GPRS data business.
MG982K-10M 3 Quick Introductions 3 Quick Start Guide 3.1 Power Supply Hunting mode or outdoor use: use 8 or 4 AA batteries. High-density and high-performance alkaline or lithium batteries are recommended. Security mode or indoor use: use 6V/2A high quality power adapter. The battery can be just a backup for emergency use. Otherwise, the battery will be quickly consumed. 3.2 Insert SD card and SIM card Insert an unlocked SD card and an available GPRS enabled SIM card. 3.
MG982K-10M 3 Quick Introductions For first time use, we suggest you to use default settings (step1). Then select your country and carriers (step2) according to your SIM card and input your receive phone number in “administrator number” and receive e-mail address in ”Receive Email 1” (step3). After finish settings, please save the GSM folder to the root directory of your SD card (step4). 3.
MG982K-10M 3 Quick Introductions the power switch to SETUP position. After the camera acquires the signal and the SIM card icon appears, target an object ” to take a photo manually. and press “SHOT SHOT” OK Then press “OK OK” to playback the photos, press “▲” and MENU “▼” to switch to previous or next photo. Press “MENU MENU” and OK you can see a send Phone [MMS] interface, press “OK OK” to send out the MMS. After a few seconds, you will receive a MMS in your phone. 3.
MG982K-10M 4 Advanced Operations 4 Advanced Operations This chapter explains the advanced operations for customizing the camera settings. 4.1 Work Mode Setup mode mode: to program camera or to playback the photos or video clips. Hunting mode mode: when animal or human intrudes into the monitoring region, the camera will take pictures or videos automatically according to the previous programmed settings.
MG982K-10M 4 Advanced Operations 4.2.1 Setting Items Setting Items Camera Mode Security Mode Photo Size Video Size Description Video or There are three camera modes: Photo Photo，Video Pic+ Video Pic+Video Video. You can enter the main menu to set the Video mode, the camera mode. If you choose Pic+ Pic+Video camera takes a picture and a 10 seconds video. To set if you will use security mode. Security mode is suitable for indoor use. You need to use the power adapter to power supply.
MG982K-10M 4 Advanced Operations Choose sensitivity of the PIR. The higher sensitivity indicates that the camera is more easily triggered by motion and takes more pictures or records more videos. It is recommended to use high sensitivity in room or environment with little PIR Trigger interference, and to use lower sensitivity for outdoor or environment with lots of interference like hot wind, smoke, near window, etc. For normal use of the camera, the Normal mode is recommended and is the default setting.
MG982K-10M Send Mode 4 Advanced Operations ”: Manual” 1. “Manual Choose “Manual” in SETUP mode. Please ensure a SIM card is inserted properly; please note only photos can be sent in SETUP mode. Video information can’t be sent in SETUP mode. ”: 2. “Daily Daily” Daily means the camera will report the summarized information at a preset time (if the preset time is, eg. 20:00 PM) on how many pictures it had taken per day. So, you will get a summarized text message with the last picture taken until 20:00 PM.
MG982K-10M 4 Advanced Operations Control SMS can enable two way communication function. It means if you choose SMS Ctrl as ON ON, this camera can receive and respond your SMS command. Also you can retrieve live pictures any time. But the power consumption will be a little bigger than normal hunting status. Please note this item is available only in Hunting Mode. It means this camera can play WAV format audio file at a preset time clock for preset times.
MG982K-10M 4 Advanced Operations 4.2.2 Default Set Default Options Camera Mode Photo Video, Pic+Video Security Mode Off On Setting Description Items Two way communication Photo Size 5MP 10MP Video Size 1280x720 640x480 Photo Burst 1 Photo 2-6 Photos Video Length 10 Sec. 20-180 Sec.
MG982K-10M 4 Advanced Operations frequency of audio playback Study Code Enter RCH(wireless control), Zone1-Zone7 Language English Beep Sound On Camera Posit Off Format SD Enter Default Set Save Version Enter Off A to Z Position Yes, No 4.3 Use the Remote Control When it’s in Security Mode, you can use the remote control to easily arm (button A) or disarm (button D). Also you can dial the emergency numbers via button C in case of emergency.
MG982K-10M 4 Advanced Operations Button B: Laser pointer Setup status Study Code Menu Study Code Menu Method to add remote control(s) to the camera: Enter the Setup status, press Menu and enter the Study RCH Code submenu. Choose “RCH RCH,,” press OK button, then press button A of the remote control. When it's successful, there will RCH. be a "√” before RCH 4.
MG982K-10M 4 Advanced Operations Page 17
MG982K-10M 4 Advanced Operations 2. Power on or trigger the wireless sensor to study code.
MG982K-10M 4 Advanced Operations 3. When you want to remove the wireless sensor, please enter the study code menu, press “◄” or “►” button to cancel the “√.” Please note that the wireless sensors just can be used in Security Mode Mode. In Hunting Mode, the wireless sensors will not function. 4.5 Change the Settings via Android APP or SMS When you are far away from your house, you can get spot photos or change camera settings via our android application tools or SMS.
MG982K-10M 4 Advanced Operations The specified website is written in the last page of the manual. 4.5.1 User Level There are two user levels: administrator and normal users.
MG982K-10M 4 Advanced Operations 0000 Here the “0000 0000” is the original administrator’s password. Please change the password ASAP. Note:there is a “#”at the end of the commend. If successful, reply SMS: Dear administrator administrator,, your number is 13800138000 13800138000. If failed, reply SMS: Please check the password. 4.5.3 Get On Spot Photo Method Method: send SMS command: Edit SMS #T# send to your camera’s SIM card.
MG982K-10M 4 Advanced Operations 4.5.5 SMS Command List If you can’t use the Android APP for easy operation, the list below shows all the SMS commands for you. You can control your camera via SMS. A. Set GSM Parameter SMS Command No Function 1 Set Administrator Number Set Normal Users Phone Number Set MMS Parameters #mg982k#0000#13800138000# Set Email Parameters Set Receive E-mail Address #s#bmctest123@sina.com#bmc123#25#cmnet #smtp.sina.com#name#password# #r#mail1@163.com # mail2@163.
MG982K-10M 1 2 3 4 5 6 7 Get On Spot Photo Arm Disarm Check Camera Settings Format TF Card Set Administrator’s Password Help No Function 1 4 Advanced Operations #T# #A# #D# #L# #F# #P#0000# (It’s suggested that the administrators password be changed at the beginning) #H# C.
MG982K-10M 15 16 Call Change SMS Ctrl Change Camera Position 4 Advanced Operations #e#zon# or #e#zoff# #e#oa# (a~z) to set the camera position function #e#ooff# to off the camera position function Page 24
MG982K-10M 5 Trouble shooting 5 Trouble Shooting 1 There is something in front of the camera lens. Is the camera broken? Figure 5 IR-cut filter A: The camera is not broken. It’s an IR-cut filter. When the camera is powered on, the IR-cut will be reset and cover the lens. Only when the camera is powered off, the IR-cut will be at a random place. 2 The camera controller is not working anymore. A: Most likely, no SD card has been inserted in the camera when it is turned on.
MG982K-10M Appendix I: PIR Detection Zone Appendix I: PIR Detection Zone Figure 6 shows the detection range in different detection angle. When the detection angle is 35°, the detection range is 50ft (15m). When the detection angle is 52°, the detection range is 30ft (9m). Figure 6 PIR Detection Zone The PIR detection angle (α) is just barely larger than the field of view angle (β). The advantage of this design is to avoid empty pictures and get more available pictures.
MG982K-10M Appendix I: PIR Detection Zone Figure 7 Detection angle vs. FOV angle This camera has a new design of PIR and the new PIR is patented. The new patented PIR’s detection range is ultra-long. Figure 8 shows the compared detection zone between normal PIR and the new patented PIR.
MG982K-10M AppendixⅡ: Error Code Append ix II Appendix II:: Error Code Code 3915 3919 3926 3927 3928 Meaning Description Possible cause: 1. The user forgets to input the receiving cellphone number. Non-existent 2. The user forgets to input the receiving address E-mail address. Suggestion: 1. Check the MMS settings, input all the necessary parameters. Possible cause: 1. The file means the image file. It shows that the system can’t find the image file when sending the MMS.
MG982K-10M AppendixⅡ: Error Code Possible cause: 1. The GSM network is not good or not well covered with the GPRS network. 2. The instability in signal transmission leads to some MMS setting parameters missing when the GSM base station do the data analysis. If for the incorrect transmission reason, the camera may show various error Failed to open code. Suggestion: 3939 network; 1. Contact the network provider if the GPRS 3941 Network network is well covered in that area. 3942 not deactivated; 2.
MG982K-10M Appendix Ⅲ: Technical Specifications Appendix Ⅲ:: Technical Specifications Image Sensor Lens PIR Detection Range Display Screen Memory Card 5MP Color CMOS, 10MP Interpolation F/NO=3.
Appendix Ⅳ: Parts List MG982K-10M Appendix Ⅳ:: Parts List Part Name Digital Camera Wireless Remote Control USB Cable Belt User’s Manual Antenna Quantity One Two One One One One Website Information: Down load the camera easy set up software from here: (version 1.
MG982K-10M Declaration of Conformity We declare on our sole responsibility that this equipment complies with the essential requirements of the Radio and Telecommunications Terminal Equipment Directive, 1999/5/EC, and that any applicable Essential Test Suite measurements have been performed. CE versions of the BG500 which display the CE symbol on the product label, comply with the essential requirements of the European Radio and Telecommunication Terminal Directive 1999/5/CE. 1.
FCC Statment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
