User's Manual

BG500 series 3 Quick Introductions
9
Step2: edit MMS parameters via computer
1) Use the USB cable to connect the camera with
your computer.
2) Wait for the 10-20 seconds for the camera to
acquire a signal. After the SIM card icon
appears,
press “MENU” to enter into set up interface.
3) Select submenu “Send to” to choose Phone
[MMS] ， and press “OK’’ to check the settings. Then
press “OK” again to exit.
You will receive the MMS with your mobile phone
notemail.Pleasemakesurethatyourmobilephonealso
opened the data business.
4) Select submenu “USB Storage” and enter into
“Mass Storage”.
5) Find the file “BG500.txt” in a folder named
“GSM” in the new removable disk of your computer.
Reedit the file “BG500.txt” to set the MMS and GPRS
parameters. Below is for reference.