User's Manual

BG500 series 3 Quick Introductions
11
previous or next photo. Then press “MENU”andyou
can see a send Phone [MMS] interface, press “OK”to
send out the MMS.
After a few seconds, you will receive a MMS in your
phone.
Step4: go to Arm Status
Arm status is the normal work status. If the camera
is in Setup s tatus, you can press “◄” key to switch to
arm status. To find the detail of the three statuses,
please refer to 4.2.
Setup status Arm Status Disarm Status
Step5: get on spot images via SMS
When the camera is armed and the Send to Mode
is Phone [MMS], you can send text message “#T#”to
your camera’s SIM card number to get an on spot image.