User's Manual

MG883G-12mHD 1 Instruction
Page
4
just when a picture or video has been taken. The
camera sends MMS or Email message through
MMSC(MMS Service Center) or GPRS network, so
before using this function, you need to open MMS
and GPRS service from your service provider. It
supports following bands:GSM with 850MHz,
900MHz, 1800MHz and 1900MHzWCDMA with
850MHz, 900MHz, 1900MHz and 2100MHz.
SIM card IconThere are two SIM card icons which
stand for different installation situations.
means
the SIM card is inserted and it works well.
means the MMS function can’t work correctly
because of loss of signal or other communication
issues.
1.6 Cautions
The working voltage of the camera is 6V.The
camera is supplied by 8 AA batteries or DC power
adapter with output of 6V. Please install batteries
according to shown polarity.
Please insert the SD card when the power switch
is in the OFF position before testing the camera.
The camera has no internal memory for saving
images or videos. If no SD card is inserted, the
camera will shut down automatically after a
continuous indication beep.
Please do not insert or take out the SD card when
the power switch is in the ON position.
It is recommended to format the SD card by the
camera when used for the first time.
The camera will be in USB mode when connected